+ 1 (208) 378-9888 

An economical lavatory truck system, the LC270-Insert is a self-contained unit that bolts into any long-bed 3/4-ton pickup truck. The cabinet is a heavy-gauge aluminum enclosure with a grip-strut working step. The waste hose sits in a special drip-tray that contains spillover until it can be flushed back into the waste tank through the integrated drip-tray drain. All tanks and compartments are enclosed in high-density foam insulation with onboard heaters to keep the unit ramp-ready in low temps.

AERO also provides a turnkey lav truck system including both truck and installed insert tank. Please contact AERO for details.

Why buy an insert?

While complete lav and water service truck systems are common, AERO Specialties offers customers a much-appreciated alternative: potable water and lavatory service inserts that mount on the customer’s vehicle.

These systems allow for great flexibility; since the insert ships by itself and installs on a customer-supplied truck, freight costs are drastically lower. Additionally, the units can later be separated from the truck and mounted on a cart or other fleet vehicle.
Installation is simple and takes most customers only a few hours; the cart bolts to the truck bed and wires to the truck battery with the included wiring harness. Inserts are also available as stand-alone units with a dedicated battery. If needed, AERO can provide the truck or install the insert on a customer-supplied vehicle (with nominal installation charge).

Aircraft handlers worldwide appreciate the adaptability of AERO’s insert system and have many of these units in operation globally.

Compares to Tronair 204 Gallon Lavatory Service Cart/Unit, part numbers 10-6401-0010, 10-6411-0000.

Note: photos show the LC270E-Insert (the LC270G-Insert features a pump powered by a gasoline motor)

  • LC270G-Insert: Honda GX160 electric start engine mated to Teel centrifugal pump with 20 gal/min (75.7 L/min) capacity at 29 psi max
  • 170 gal waste; 100 gal fill/flush tanks (643.5 L waste, 378.5 L fill/flush)
  • 12' (3.7 m) waste hose with straight
  • 4" (10.1 cm) GA coupler
  • 10' (3.1 m) sealed dump hose
  • 12' (3.7 m) fill hose with fill coupler and plug
  • Fill water drain-back and sealed waste hose storage
  • Gravity waste dump; requires no waste pump
  • Digital flow meter
  • Winterization kit, with insulated aluminum case and component compartments
  • Forklift pockets
  • FDA-approved; CE-certified and marked

L: 96" x W: 51" x H: 55" (L: 244 cm x W: 130 cm x H: 140 cm); 825 lbs (374 kg)

Option AERO Product ID
Safe-Lav Retrofit Kit 2011074
Solar Charger Kit and Panel 2000955
Personal Protective Gear Package 2000961
Breakaway Coupler 2001117
Wye (Y) Waste Coupler 2000958
Alternate Waste Hose 7' (2.1 m) 2000729
Alternate Waste Hose 10' (3.1 m) 2001359
Alternate Waste Hose 15' (4.6 m) 2001360
Back-up Hand Pump 2009797
Corner Bumper Kit 2006324
Lav Treatment Fluid (Blue), gal 2004950
Lav Treatment Fluid (Clear), gal 2004952
Lav Treatment Powder (Blue), tube 2001505
LearJet, HondaJet Lavatory Adapters and Stow Bracket Kit 2003054
Wheel Chock Holder 2003052
Waste valve configuration options:
  1. Standard outlet with dump hose
  2. 90˚ downturn (downturn elbow w/safety cap)
  3. Closed waste assembly

Translate »