+ 1 (208) 378-9888 

GPI 1-Inch G2 Industrial Aluminum Digital Flow Meter, 5-50 GPM

$1,408.44 USD

Prices shown are for products sold in USA only. For pricing in regions outside of USA, please request a quote.

Lead times vary, contact us for availability

The GPI 1″ G2 Industrial Aluminum Digital Flow Meter features the factory-calibrated LCD 09 Computer that precisely reads both gallons and liters. The Turbine design and high-quality components allows for inline flow rates to be accurately measured. This flow meter is perfectly suited to measure Type 1/2/4 aircraft deicing fluids with propylene glycol.

  • Flow Range: 5-50 GPM, 18.9-190 LPM
  • Pressure Rating: 300 PSI, 21 bar
  • Computer: 09 LCD – 2 totals (resettable/cumulative), 2 user calibrations and flowrate
  • Fitting: 1-inch NPT

  • Dimensions: 4.5" L x 2" W x 2.9" H (11.4 x 5.1 x 7.4 cm) with computer
  • Weight: 1 lbs. (1.2 kg) with computer

*Computer electronics add 0.7" (1.8 cm) to height and 0.2 lbs (0.1 kg) to weight.

  • Design Type: Turbine
  • Inner Diameter: 1-inch
  • Fitting: NPT 1-inch
  • Accuracy: ±1.0%, ±1.5% of reading without computer
  • Flow Range: 5-50 GPM, 18.9-190 LPM
  • Repeatability: ±0.1%
  • Operating Temperature: 0 to +140ºF (-18 to +60ºC), -40 to +250ºF without computer (-40 to +121ºC)
  • Frequency: 47-470 Hz at 5-50 GPM
  • Recommended Strainer Size: 55 mesh
  • Display: LCD - 09 Computer
  • Reads: Gallons and litres
  • Electronic Choice: 09 Computer - 2 totals (resettable/cumulative), factory calibration in gallons and litres, 2 user calibrations and flowrate
  • Pressure Rating: 300 PSI, 21 bar
  • Wetted Materials: Aluminum housing, ceramic bearings, 316 stainless steel rings, PVDF rotor, tungsten carbide shaft
  • Typical K-Factor: 565
  • Wrench Flat Size: 1 5/8-inch, 41 mm
  • GPI Model: G2A10N09GMA
  • Approvals: ATEX II 1 G Ex ia IIC T6 Ta = -40°C to 60°C; IP65, CE, EEx nL IIC T4 U, Factory Mutual Approved, Ingress Protection Code, NEMA 4, Underwriters Laboratories - cUL
  • Warranty: 1-year

Translate »